Making a flash drive bootable sometimes using the Power ISO or any other Burning Studio can
be frustrating, that is the reason i have come to the point of gettinng you a new way to make your
drive bootable for Installation with the following few steps.
STEP 1
Go to the command promt
How to execute - Press Windows Key + R and type cmd in the box or better still
Click Start in the search button type cmd> Enter.
STEP 2
Type Diskpart
It will show you the list of available disk, select the flash drive, it varies on the amount of
drive you are having for example mine is Disk 1
STEP 3
Type select disk 1
STEP 4
Type clean
NOTE: - All your files will Vanish
STEP 5
Type create partition primary
STEP 6
Type select partition 1
STEP 7
Type active
To make the drive active
STEP 8
Type format fs=ntfs=quick
NOTE:- but if your drive is Less than 16GB you should use FAT32 instead of ntfs.
Cheers Buddies !
Thank You.
be frustrating, that is the reason i have come to the point of gettinng you a new way to make your
drive bootable for Installation with the following few steps.
STEP 1
Go to the command promt
How to execute - Press Windows Key + R and type cmd in the box or better still
Click Start in the search button type cmd> Enter.
STEP 2
Type Diskpart
It will show you the list of available disk, select the flash drive, it varies on the amount of
drive you are having for example mine is Disk 1
STEP 3
Type select disk 1
STEP 4
Type clean
NOTE: - All your files will Vanish
STEP 5
Type create partition primary
STEP 6
Type select partition 1
STEP 7
Type active
To make the drive active
STEP 8
Type format fs=ntfs=quick
NOTE:- but if your drive is Less than 16GB you should use FAT32 instead of ntfs.
Cheers Buddies !
Thank You.
No comments:
Post a Comment